Technology
The Canalyzer MTB is our flagship dud detector. This machine measures
the deflection on both ends of the can at high speeds. Our special high-frequency
scanning technology allows the Canalyzer to accurately profile the can end over
several hundred to several thousand data points. This scanning technology
allows the Canalyzer to be able to detect a leaking can, even if there is minimal
change between a good can and a leaking can. |
 |
|
Top |
Highlights
- Top and bottom inspection
- Inspects 2- and 3-piece cans
- Inspects any can type and size
- Inspects EZO cans
- Quick and easy changeovers
- High speed (1200 standard, 1600 custom)
- Precision integrated conveyor
- Easy to use
- Displays measurements in real units (0.001" increments)
- Washdown or warehouse
- All stainless steel and engineered plastics
- Available conveyor extensions available in several styles and lengths
|
|
Top |
 |
Features
- The Canalyzer MTB has its own precision integrated conveyor for accurate inspections.
- Displays measurements in .001 inch increments that can be matched to a depth gauge reading
- Both ends of the can are tested against independent control limits.
- SLC controls automatic selection of set points can be used to start a new code based on the standard deviation in seconds. Trending set points or percentage kick outs can also be maintained automatically.
- Precision caliper and floating sensor sled for accurate inspections fast changeover times
- Inspects any type can
- Wear parts are made from a static dissipating material; this eliminates sensor interference.
|
Specifications
- Speed: Up to 1200 inspections per minute (high speed versions can accommodate up to 1600 inspections per minute)
- Can size: standard MTB: 211-404 (versions available for 200 - 211 and 404-603)
- Conveyor height: standard MTB: 32.0" +/- 2.0"
- Eject: pneumatic cylinder with soft bumper
- Required spacing: 0.1 inch with zero backline pressure from containers. Accumulation should stop 20 inches from discharge.
- Construction: stainless steel and engineered plastics
- Air: 35-50 psi; 1/4" or 1/2" air line
- Power: 110 VAC isolated incoming power for electronics; 240 VAC three-phase or 480 VAC three-phase for motor
- Length: standard MTB is 40.0" in length; conveyor extensions are available in lengths of 32", 40", or 48"; side transfer or end transfer
|
| Top
|
|